uPVC Window Repair
While uPVC windows are tough and resistant to harsh weather conditions they are not immune to issues that require fixing. Luckily these problems can be fixed at a less than the cost of replacing a window.
A common issue is that windows become difficult to open due to its hinges being stiff. Fortunately, this can be fixed by lubricating the hinges using something similar to WD-40.
Cracked or Broken Glass
Glass is everywhere in our homes: on doors, windows and tables in stoves and microwaves, even in frames for pictures. A well-hit baseball game or rough-housing with your friends can cause cracks to your windows that need to be repaired promptly before they get any worse. Fortunately, these kinds of cracks are easy to fix without needing to replace your window glass or frame.
First, clean the area with a damp cloth to remove any dust, dirt or fingerprints. Use a small amount epoxy to seal around the crack. Allow the epoxy to dry completely before moving the window again. This repair is easy and will save you money on replacing your uPVC window.
Another common problem with uPVC windows is the window gasket becoming weak or falling off from the frame. This will result in a loss of insulation and a allow in of cold air or water into your home. It is possible to fix this by using a flat knife, like a credit card to break the gasket and the window frame. If you've got a bit of time you could also apply a little more epoxy on the crack to make it appear like the crack never existed in the first place.
If the crack is larger than you can reach with your fingers, apply a piece of tape to protect the area from further damage. Alternately, you can apply clear nail polish to fill in the crack and prevent it from growing further. It is essential to act fast after noticing the crack. Otherwise, it will spread and become more difficult to fix.
If you are looking for an option that is more durable you can try uPVC epoxy to repair your broken or cracked glass. This is the longest and most labor-intensive of the options however it will provide the most efficient results in terms strength and appearance. Follow the directions of the manufacturer for applying the epoxy. Once it has dried, apply an acetone-soaked rag to smooth the surface.
Water Leaks
Upvc windows are very durable, but they require some maintenance and attention. They can cause a myriad of problems if they are not maintained in a timely manner. These issues can range from leaking water around frames or even condensation within the glass units.
RepairMyWindowsAndDoors can help identify the problem and resolve it. They can also give suggestions on how to avoid it occurring again in future.
Leaking uPVC Windows can be a major problem and should be addressed immediately when they happen. If ignored, the damage could cause significant damp issues to your house, which can lead to costly repairs and a decrease in energy efficiency.
A leaking uPVC can be fixed with a simple patch. This is a sealant that is applied to the inside of the window. It will stop water from getting into your home through the damaged area.
Cloudy or misty double glazed units are a sign that the seal between the panes of glass has failed. It could be due to a variety of causes, including age, weather conditions or just wear and wear and tear.
You can avoid this by having your windows regularly cleaned. It is recommended to wash them at least twice a year using a soft white cloth soaked in warm water and soap that is liquid. It is important to stay clear of using any colored cloths because they can leave dye stains on the plastic. For stubborn stains it is recommended to apply solvent PVC cleaner. This is available from any hardware store and is simple to apply. Remember to wipe the window frames in a shaded location away from direct sunlight in order to avoid any streaking.
Faulty Hinges or Locks
Over time, a hinge for windows can become damaged or bent out of shape. This could cause a gap to appear in the frame, which allows in draughts, and decrease your energy efficiency. A draft can also make your home feel cold and uncomfortable and can increase your heating bills.
A gap in uPVC is a problem that can be fixed easily. A uPVC specialist will find the problem and fix it for you. A small hole can usually be fixed with the help of carpenter's glue and a wooden dowel inserted into the gap. The dowel should be placed in a manner that it is flush with the leaf of the hinge, and has a smooth finish. Then the carpenter's glue should be spread over the wood dowel and tapped in to place. Once it has dried it is possible to screw installed to secure the hinge.
UPVC window hinges and locks may become stiff to open and close over time due to general wear and tear, or due to blockages caused by dirt and dust. They should be inspected regularly and cleaned to ensure they function properly. Make use of WD-40 to ensure that moving parts remain in good working order.
It is recommended that UPVC windows be cleaned at least twice a year. This should be done using a damp cloth that has been dipped into a mixture of mild soap and water. To prevent rust and dirt, clean the areas around the corners more frequently.
It can also be difficult to open or close the handle of a uPVC windows. This could be the result of the handle falling or caused by problems with the locking mechanism. This is a simple and quick repair that can be done by the homeowner if they follow a few simple steps.
A broken lock can pose a real security risk as it could mean that your home is not secure and could be vulnerable to intruders. A damaged lock could cause your uPVC door or window difficult to open, which can be an inconvenience for you. A new handle or a re-alignment of the multipoint locking mechanism may be needed if this is the situation.
Stuck Handle
It can be quite frustrating when your upvc window handle is stuck, particularly when you try to open the window and it requires lots of force or doesn't open at all. It is usually due to a wire that sits inside the handle holder and has become rough. It is usually possible to fix the problem by simply pulling the handle out to examine the wire.
Another method to get this fixed is by using a graphite or paraffin lubricant on the pole sliders which will then allow the handle to move upwards and downwards. It's also an ideal time to give your handle a thorough clean as this will help avoid any future issues related to it.
If the problem is with the push button itself, it can be repaired by using superglue on it. Superglue must be completely dry prior to applying it again. If the handle has been completely damaged or broken, you can replace it by ordering an alternative and putting it in the frame. It is easy to fix the issue yourself if have the appropriate tools.